KICKER 10" MARINE 4 Ohm 175W Subwoofer - Hotwire
KICKER KM 6.5″ 195W Pair 4 Ohm Coaxial LED Marine Speakers
March 12, 2019
KICKER 10″ MARINE 2 Ohm 175W Subwoofer
March 13, 2019

KICKER 10″ MARINE 4 Ohm 175W Subwoofer

$259

The KICKER® KM 10-inch Marine Subwoofer makes waves of its own in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bang in your boat.

MAKIN’ WAVES

Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs.

Features

  • Four-Ohm Voice Coil
  • Injection-Molded Polypropylene Cone
  • Co-molded Santoprene® Surround
  • UniPlate™ Back Plate And Pole Piece
  • Thick Tinsel Leads
  • Large Ceramic Magnet
  • Rear Gasketing Included
  • Polymer Basket Resists Corrosion
  • Protective Terminal Cap
  • Stainless Mounting Hardware Included
  • Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
    (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)

Want setup help? Go to KICKER U for a free woofer & amplifier configuration app!

*The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details.

Description

Specifications

80 45KM104

Woofer(in,mm)
10, 25
Impedance (OHMS)
4 SVC
Peak Power Handling(Watts)
350
Continuous Power Handling(Watts RMS)
175
Sealed Enclosure Volume Min-Max(ft³, L)
1-2.4, 28.3-68
Vented Enclosure Volume Min-Max(ft³, L)
1.25-1.75, 35.4-49.6
Frequency Response(Hz)
30-500
Mounting Depth(in, cm)
5, 12.7
Hole Diameter(in, cm)
9-3/16, 23.2
Outer Diameter(in, cm)
10-11/16, 27.1
What’s in the Box:
1 – 10″ Woofer
1 – Back gasket
8 – Mounting screws
8 – Mounting screw clips
1 – Manual