KICKER 10" MARINE 2 Ohm 175W Subwoofer - Hotwire
KICKER 10″ MARINE 4 Ohm 175W Subwoofer
March 12, 2019
KICKER KMTED 6½” Empty Enclosure Pair
March 18, 2019

KICKER 10″ MARINE 2 Ohm 175W Subwoofer

$259

The KICKER® KM 10-inch Marine Subwoofer is made to work perfectly in a sealed or ported enclosure.

ABOUT THAT BASS

Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with KM boat subs.

Features

  • Two-Ohm Voice Coil
  • Injection-Molded Polypropylene Cone
  • Co-molded Santoprene® Surround
  • UniPlate™ Back Plate And Pole Piece
  • Thick Tinsel Leads
  • Large Ceramic Magnet
  • Rear Gasketing Included
  • Polymer Basket Resists Corrosion
  • Protective Terminal Cap
  • Stainless Mounting Hardware Included
  • Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
    (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)

Want setup help? Go to KICKER U for a free woofer & amplifier configuration app!

*The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details.

Description

Specifications

Woofer(in,mm)
10, 25
Impedance (OHMS)
2 SVC
Peak Power Handling(Watts)
350
Continuous Power Handling(Watts RMS)
175
Sealed Enclosure Volume Min-Max(ft³, L)
1-2.4, 28.3-68
Vented Enclosure Volume Min-Max(ft³, L)
1.25-1.75, 35.4-49.6
Frequency Response(Hz)
30-500
Mounting Depth(in, cm)
5, 12.7
Hole Diameter(in, cm)
9-3/16, 23.2
Outer Diameter(in, cm)
10-11/16, 27.1
What’s in the Box:
1 – 10″ Woofer
1 – Back gasket
8 – Mounting screws
8 – Mounting screw clips
1 – Manual