The Performance Amplifier Series boasts a stunning metallic finish with diamond cut trim and contoured end plate covers, showcasing unparalleled design treatments; and this is only the beginning.
We’ve introduced a new concept to the range, a removable insert panel for those who want to show off a truly unique installation. Remove, replace, design and create your own work of art, your FUSION Performance amplifier is the ultimate blank canvas.
Good looks aside; the Performance amplifier series delivers high efficiency raw power to any car stereo system, this 4 Channel Class-AB amplifier delivers a massive 2400 Watts of power to your systems veins and with this much performance pumping be prepared to turn heads wherever you go.
Equipped with maximum current heavy-duty connector blocks, high* and low level input connections as well as OEM compatibility for owners of current model VW and Audi vehicles. 4-Way Protection: thermal, reversed polarity, DC offset and low voltage protection is engineered into the Performance series for prolonged and piercing power.
FUSION has proven yet again that power and performance can be affordable and fun.
|Bass Boost @ 45Hz||0 – +18dB|
|Crossover Range||50Hz – 400Hz|
|Damping Factor||Greater than 200|
|Frequency Response||20Hz – 20kHz|
|High and Low Pass Crossover||12dB per Octave|
|High Level Input Range||1 Volt to 30 Volts|
|Low Level Input Range||0.35 Volts to 10 Volts|
|Minimum load impedance||2 Ohm stereo and 4 Ohm bridged|
|Number of Channels||4|
|Operating Voltage||10.5 – 16 Volts|
|Power Requirements||12V DC (Negative Ground)|
|Recommended Minimum Power/Ground||4 Gauge (AWG) Cable|
|RMS Power Output @ 14.4V 1% THD+N||80W x 4 (@ 4 Ohm)|
|RMS Power Output @ 14.4V 1% THD+N||100W x 4 (@ 2 Ohm)|
|RMS Power Output @ 14.4V 1% THD+N||200W x 2 (@4 Ohm Bridged)|
|Signal to Noise Ratio||>50dB|